Rubber Akron Abrasion Tester for Vulcanized Rubber Abrasion Resistance

0 out of 5

Akron abrasion tester is used to measure the abrasion resistance of vulcanized rubber. During the test, the sample and the grinding wheel are rubbed under a certain tilt angle and a certain load, and the wear volume of the sample within a certain mileage is measured.

Description

Since Akron abrasion testing machine is different for different industries, and conforms to different international, national and industrial standard, the material, industrial and technical parameters, control procedures, etc. hence the tester should be determined according to the requirements of customers. We support customized akron abrasion tester.
Akron abrasion tester is used to measure the abrasion resistance of vulcanized rubber. During the test, the sample and the grinding wheel are rubbed under a certain tilt angle and a certain load, and the wear volume of the sample within a certain mileage is measured.
This machine support digital setting, display of abrasion times, automatic shutdown, design of main machine and electrical control as a whole, use of calibrated grinding wheel, beautiful appearance and convenient operation, it is a uppgrade testing machine.
General technical parameters
1. The acting force on the rubber wheel is 26.7n (2.7kgf)
2. The rotation speed of rubber wheel shaft is 76 ± 2r/min
3. The rotation speed of grinding wheel shaft is 33-35r/min
4. The included angle between the rubber wheel shaft and the grinding wheel shaft can be adjusted within the range of 0 ° -45 °
5. The power supply voltage is AC220V ± 10%
6. Overall dimension (length × wide × Height) 600 × four hundred and eighty × 400(mm)
7. Net weight: 60kg
8. Attachment: 1 electronic counter